FOCUS-SM-08

Purpose

Data acquisition and processing device is intended to collect, display and store the information about the status of 8 detectors (D), of connecting communications lines (if there is a breakage or a short circuit), status control of two door detectors and state of electromechanical lock (ZU), remote monitoring of detector serviceability and electromechanical locks (ZU) control and door latch.

The device provides the following:

• displaying the status of each alarm loop (AL) that are under control (normal mode and alarm mode), using LED indicators of a liquid crystal display (hereinafter referred to as the display) and the built-in speaker signal;
  
• automatic control of alarm loop failure (breakage or a short circuit);
  
• counting the total number of alarm loops signals, disconnecting the supply voltage from the device, disconnecting the AL and changing the AL from the arming mode to disarming, counting of alarms per each AL, number of disconnecting and changing the mode from arming to disarming;
  
• automatic switching on (off) of the supply voltage of electronic detectors when each alarm loop is connected to security mode (disarming);
  
• archive the events with reference to to real time (date and time of the event);
  
• display information from the archive of events;
  
• safety of the event and information archive in all device counters when the supply voltage is disconnected for up to 5 days. 

Components:

• Control and display panel
• Junction box
• Optional equipment:
• External device controllers
• Lock control unit
• Converter

Distinctive features:

• The type of each detector connected (electronic/contact, with normally closed and normally open contacts) and the mode of its remote monitoring (with deenergizing/without deenergizing) are programmed.
  
• Supply voltage can be switched to a detector via built-in electronic switches with short-circuit fault protection.
  
• Audible indication (at a built-in loudspeaker and a remote annunciator) and light indication (at bi-colour light-emitting diodes and a liguid-crystal display) of the device statuses.
  
• It is possible to control external devices, two remote display panels and locks.
  
• Real time displaying and energy-independent event archiving (including control of operator presence) with reference to time, date and ability to view archive operationally.
  
• Built-in elements of lightning protection of output and input circuits.